WB Classic Fuel Cleaning Range

If you store fuel for more than a few weeks at a time, or acquire fuel in a country where there are not strict regulations on fuel specification, you should have an effective fuel cleaning system in operation.

Fuel infection from water or other foreign matter can damage or destroy an engine, so maintaining fuel quality is vital.

The WB range of Fuel Cleaning Systems offer a fuel cleaning solution with many of the features of the W-PFS range but is the more cost effective solution. These quality systems will clean your fuel automatically, removing water, bacterial infection, sludge solid and semi-solid contaminates from your fuel up to 10 micron. The WB Classic range can be custom built to your specifications and we have a wide range of add-on options to meet all your needs.

Available in either 220v 50hz 1ph AC, 24v DC or 12v DC

If you require touch screen technology, BMS (Building Management Systems) and field bus functionality, emulsified water removal and filtering to 2 micron, we recommend the W-PFS Range.

10 lit/min Fuel Cleaning-10 micron(10 lit/min fuel polishing system which removes particulate, bacteria and free water. Complete with a PLC control box to programme when to run.)

Fuel Conditioner(The WASP Fuel Conditioner is a key component of the PFS Fuel Polishing range. The internal magnet neutralises bacteria cells as well as attracts metal filings.)

Popular Marine Model (This wall mountable WB-10 is very popular on board yachts and boats. This model will clean up to 10 lit/min and removes particulate, bacteria and water to 10 micron.)

25 lit/min in enclosure (Ideal for 10,000 to 30,000 litre fuel tanks)

PLC Control (Complete with a PLC control box to programme when to run.)

Protection (Protect your fuel polishing machine from the elements and being tampered with.)

Add-on: Drip tray (Drip tray option complete with drain tap to avoid diesel spills when emptying separated water from machine.)

Best quality fittings(Our systems are designed and engineered by our in-house professional fuel filtering team.)

Add-on: enclosure (Ideal for outside locations as it is mounted in a powder coated enclosure complete with latch.)

Fuel Polishing Results (The sample on the right was removed from the bottom of a fuel tank. The cloudy appearance shows the contamination and there is free water at the bottom of the jar. The left example is after one pass through a WASP Fuel Polishing Machine)

free water(Free water sits at the bottom of the fuel tank and when passing though an engine can cause rust and engine damage resulting in costly repairs.)

Fuel Tank Contamination (This is an example of a fuel tank which has been effected by a bacterial infection caused by water in the tank. Water is created from condensation and rain leaking in to the tank.)

10lit/min portable system (Our portable WB fuel cleaning units are popular with businesses who need to clean multiple tanks on different sites.)

WB-40 Wall Mounted(Cleaning 40 lit/min to 10 Micron.)

SUITABLE FOR

Tank sizes up to 50,000 litres Cleaning 10-40

Litres per minute

PLC CONTROL

Manual and auto set up options

FUEL PROTECTION

For marine, generators, yachts and boating, hospitals, agricultural tanks etc

CLEAN TO 10 MICRON

including free water, bacteria, dirt and particulate.


Model	WB-10	WB-25	WB-40
Max flow rate	10 lit/min max flow rate**	25 lit/min max flow rate**	40 lit/min max flow rate**
Recommended Tank size	0-12,500	10,000 - 30,000	25,000 - 50,000
Power options	220v 50hz 1ph AC 12v DC 24v DC	220v 50hz 1ph AC 12v DC 24v DC	220v 50hz 1ph AC 24v DC
Finish options	Wall Mounted, Frame Mounted, Enclosure, Trolley	Wall Mounted, Frame Mounted, Enclosure, Trolley	Wall Mounted, Frame Mounted, Enclosure, Trolley
Particulate removal to	10 Micron	10 Micron	10 Micron
Control unit	PLC	PLC	PLC
BMS (Building Management Systems) Outputs	1	1	1
BMS Inputs	2	2	2
Fuse	220vAC 4a 12vDC 6a 24vDC 3a	220vAC 2.5a 12vDC 5a 24vDC 2.5a	220vAC 2.5a 24vDC 11a
Typical current	220vAC 1a 12vDC 2a 24vDC 1a	220vAC 1.5a 12vDC 2.2a 24vDC 1a	220vAC 1.5a 24vDC 8a
Suction capability	5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes	3/4" BSP-P Male	1" BSP-P Male	1" BSP-P Male
Pump Body	Nickel Plated	Nickel Plated	Nickel Plated
Gears	PTFE Vane	PTFE Vane	PTFE Vane Pump
Shaft	Stainless steel	Stainless steel	Stainless steel
Seal	Flouoroelastomer lip seal	Flouoroelastomer lip seal	Flouoroelastomer lip seal
Dimensions *	700x600x240mm	700x600x350mm	600x900x350mm
Weight *	16kg approx (AC) 19kg approx (DC)	19kg approx (AC)21kg approx (DC)	26kg approx (AC) 29kg approx (DC)

****Flow rates quoted assume the ideal conditions, a large positive head, no left, wide pipe work, etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

Add on Options

Get a Quote

WB-10

WB-25

WB-40

Case Studies

Gallery

Product Selector Widget